Posts Tagged 'shrink plastic'

Both candy and corny at the same time.

I really like things with happy faces on them. Especially food. Even food I don’t eat.

I don’t eat candy corn, but boy I’m going to love wearing it! And even more than that, I love how simple and quick this project was.

All you need is:

  • Shrink plastic (the regular old clear plastic Shrinky Dink kind is the standard, but there may be other brands available); You should be able to find this at your local craft store or online
  • Colored pencils or markers (I’d stick to the colored pencils; They seem to give the best results; I’d avoid Sharpie markers because the pigment is too saturated)
  • Candy corn template (please see below)
  • Scissors
  • Hole punch (A standard hole punch will work just fine, just make sure you punch your hole 1/8″ or so from the edge of your original-sized shrink plastic, before shrinking; If you leave less space than that, your hole may break open entirely as the item shrinks); However, I have found that a 1/8″ hole punch gives you a much smaller and more precise hole, and will still accommodate a standard-size jump ring or earwire after shrinking
  • Oven/tin foil/cookie sheet
  • Earwires and pliers for attaching the earwires to your candy corn
  • optional**: Acrylic sealer (It will help to prevent the color rubbing off your finished piece of jewelry)

  1. Print out the above candy corn templates; Notice that the two candy corns are mirror images of each other; If you like your earrings to be 100% identical, you can trace one image twice
  2. Trace the images lightly onto your shrink plastic. Please note that you will be drawing on the rough side of the shrink plastic, not the smooth side. Start by coloring in the white, orange, and yellow, then go back in to add the pink for the blushing cheeks, and the black for the eyes; If the colors do not seem vibrant enough to you, don’t worry; Colors will intensify during shrinking.
  3. Once all of the colors have been filled in to your satisfaction, trace around your image with black for a nice crisp outline; Note: If you want to conserve your shrink plastic, try to trace your images as close to the edges of the plastic as you can. Also, don’t leave wide spaces between the images you trace. The closer they are together (while still allowing you cutting room) the more finished projects you can get out of one sheet of plastic
  4. Carefully cut your pieces out, following the outlines/edges you drew for yourself
  5. Make sure to punch a hole at least 1/8″ away from the edge of your piece with your hole punch so that you can hang your image safely from an earwire
  6. Preheat your oven to 325 degrees F. Line a cookie sheet with tin foil and place the cut-out pieces colored or rough side up onto the foil.
  7. Slide your cookie sheet into the oven, but do not leave the area; It will only take 1-5 mins for your item to shrink. For safety’s sake – and for fun – you should watch the entire process through the oven window. Please note that your piece will buckle and curl as it is baked, but don’t be too hasty in removing the piece from the oven while it is still in a curved shape. The curves should flatten out again on their own in a few moments
  8. Let your pieces cool; If you like, once pieces are fully cool, you can take an acrylic sealer and paint or spray on your design to seal in the color and prevent rub-off
  9. Now, using pliers, carefully open an earwire and slip 1 of your candy corns onto it; Repeat for the other earring
  10. That’s it!

Hope you’re enjoying Halloween week to the fullest all!

Advertisements

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 3 other followers

Pages of this blog

Blog Stats

  • 12,166 hits